Check your regional water hardness level by consulting your local authorities or the internet.Ģ. To set the washer for local water hardness (washer is preset for soft water):ġ. Press the knob to confirm your selection. Turn the knob to adjust the dosing value to the one shown on the detergent bottle. Touch and hold the Dosing Aid button until the bottle symbol on the display lights up.ģ. Check your detergent dosing amount for medium soil level and medium water hardness. NOTE: Do not add more than the dose recommended by theĢ. Touch and hold the Start/Pause button to continue the cycle.ġ. After adding detergent, close the detergent dispenser. Use any standard measuring cup to measure out the right detergent amount. The display will then show the recommended detergent amount in milliliters. During load detection, the time display changes from cycle time to a chasing LED animation. When you touch the Start/Pause button to start the program/cycle, the drum will rotate to detect the load size of the laundry. When you touch this button, the Detergent Dosing Aid symbol lights up in the display.
Also check if the washer’s preset water hardness level matches your local water hardness level and adjust it if needed. The concentration of detergents varies considerably, so adjust the amount of detergent as needed. This option helps to determine the correct amount of detergent for your laundry load. To turn off the TumbleFresh™ option, touch the TumbleFresh™ button. If, however, the TumbleFresh™ option is turned on, it will stay on for all future cycles until turned back off – the washer remembers the last on/off status set. To turn on the TumbleFresh™ option, touch the TumbleFresh™ button. The TumbleFresh™ option will periodically tumble the load after the end of the cycle every 3 minutes for 7 seconds, for up to 6 hours. Suitable for lightly soiled colored laundry without stains.
This option helps to preserve the colors of your laundry by washing them with cold water 59☏ (15☌). Additional wash options or additional features selected after touching the Start/Pause button may not be activated. To return to factory default cycle settings, unplug the washer for 30 seconds, then plug back in. OPTIONS: Touch to select additional wash options or additional features on the washer before touching the Start/Pause button. Press the knob to confirm your selection. Press the knob when the indicator next to the desired program/cycle lights up.ĬONTROL KNOB: Turn the knob to select a program/cycle for your laundry load, change program/cycle temperature, adjust spin speed, set delay start time or dosing values, or select Other Options. PROGRAM/CYCLE AREA: An Indicator next to each program/cycle lights up as you use the knob to scroll through the list. The program settings which you used last will appear on the control panel as a default. This indicates you can now select your program or cycle. PROGRAM (cycle): When you turn on the washer, the light above this button will turn on. “rES” is displayed when the cycle is canceled. Symbols appear on the control panel and sounds are played.
The indicators above all the buttons will scroll from left to right as the washer turns on. POWER BUTTON: Touch and hold until the indicator above the Program button lights up.
#ON OFF BUTTON SYMBOLS MANUALS#
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.
0 kommentar(er)
